
Polycone 750 cyclone: drop box + 2-chute cone
- Drop box
- Dual bomb-bay doors
- 2-chute fixed cone splitter
- Part No.
- 23 001 0317
- Weight
- 457 kg
- Height
- 3 063 mm

Made in Australia · Metzke since 1978
Polycone sampling systems with bomb-bay doors and the Metzke Rotary Splitter — accurate, repeatable samples in wet and dry drilling. Supplied in Kazakhstan by GeoSupplies Hub LLP: selection for your rig, customs clearance and delivery to site.
Why it matters
Sample leaves the cyclone unevenly and settles in the drop box in layers. A conventional cone splits that stream with a systematic bias.
Material sticks to the walls and the next metre mixes with the previous one — especially in wet and clay-rich ground.
Many splitters lose accuracy on wet samples. The Metzke Splitter keeps it — confirmed by testwork.
Metzke solves it by design: polyurethane cones that resist hang-up, bomb-bay doors with no internal bridge, 200 mm inlets and a rotary splitter running at 250–300 rpm.
Catalogue
New Polycone Bomb-Bay Door range (September 2026). Prices on request — we'll send a quote on WhatsApp.















Configure
Three questions — and you'll see the part number that fits your rig.
Choose your answers on the left
Technology
Metzke testwork overseen by Digirock Pty Ltd (Perth, Australia) compared the Metzke Splitter with a used third-party rotary cone splitter on quartz sand, gravel, glass beads, lead shot and plastic beads — dry and wet.
| Parameter | Metzke Splitter | Rotary cone splitter |
|---|---|---|
| Distributor speed | 250–300 rpm | 25–40 rpm |
| Sampling frequency | 4–5 times per second | once every 1.5–2.4 s |
| Wall cleaning | internal paddle — less hang-up and contamination | — |
| Test result | outperformed in almost every metric | baseline |
Source: Digirock Pty Ltd technical note “Metzke Splitter Test Program: Preliminary Results”, commissioned by Metzke Pty Ltd.


Design
Replaceable ceramic linings: longer life, simple to change.
Reduced sample hang-up, simple to clean, 200 mm outlet.
No internal bridge for unimpeded flow. 200 mm inlet and outlet, positive sealing.
2 or 3 chutes, 200 mm inlet, 4–12% adjustable, hydraulic hinge.
2 or 3 chutes, 200 mm poly inlet funnel, 3–15% adjustable, for wet and dry drilling.
Rig mounting brackets, wear parts and splitter spare kits.
Gallery







Delivery
WhatsApp or call us: rig model, dry or wet drilling.
We pick the configuration and send a quote in tenge.
We place the order with Metzke in Australia — built in the shortest possible time.
Air freight to Kazakhstan — 8 days.
Customs clearance and the full set of closing documents for subsoil users.
Why us
We're close and reachable; contract and paperwork in Kazakhstan.
We know the sampling, tender and documentation requirements.
Contract with a Kazakhstan LLP, payment in tenge.
Selection, ordering, logistics, customs, delivery to site.
Linings, cones, splitter parts and spare kits.
Beyond Metzke — drill rigs, bits and tooling: one supplier for the whole drilling package.
FAQ
The 750 is medium duty, more compact and lighter (370–515 kg). The 1200 is heavy duty for high-output compressors (506–615 kg). Both have replaceable ceramic linings. We'll match the right one to your rig and compressor.
The fixed cone (2 or 3 chutes, 4–12% split) works well in dry drilling. The Metzke Splitter (3–15%) is for wet and dry drilling and the best accuracy between primary and duplicate samples.
Each metre of sample is collected and dumped whole into the splitter through dual bomb-bay doors, giving better control of the interval. Without a drop box the system is lower and lighter.
We manufacture in the shortest possible time, depending on factory load. Delivery to Kazakhstan takes 8 days. The exact lead time is stated in the quote.
Send us your rig model and a photo of the mounting area — we'll check compatibility and select a bracket.
Contract with GeoSupplies Hub LLP, payment in tenge. Payment terms are in the quote.
Yes: ceramic linings, polyurethane cones, splitter distributor, wear plate, flex cone and scraper, and spare kits.